DuraDeck Matting

Bryant Utility is proud to offer this high quality matting system that's sure to make your project area a whole lot easier to work on. DuraDeck mats are manufactured to the highest standard – using super-strong, high-density polyethylene plastic (HDPE). Each panel is constructed from a solid sheet of molded material, providing greater strength and shear resistance then layered, hollow, or laminated systems. There are no weak spots to break, chip, or separate. DuraDeck mats are chemical and weather-resistant and contain a UV additive to prevent damage and deterioration from exposure to the sun.

Each DuraDeck panel has a unique integrated tread pattern molded onto both sides, providing traction and stability for nearly any type of equipment, cranes, vehicles, and pedestrians. Place mats over marshy terrain, mud, sand, and other soft surfaces for access, traction, and ground protection.

DuraDeck can handle loads up to 80 tons, depending on the subsurface quality and consistency. For most grass lawns and athletic fields you can comfortably move tractor trailers, cranes, forklifts, staging, gen- erators, and other pneumatic-wheeled equipment of up to 80 tons. For muddy and/or flooded areas, sections should be linked with DuraLink™ metal connectors.

DuraDeck offers several connection options, depending on the type of equipment, loads, and application involved. Each panel has pre-molded connection holes that allow sections to be connected side-by-side or at 90-degree angles to one another. Create temporary roadways, portable work pads, and compound flooring easily with DuraDeck.

DD1

Double-Sided, Rugged-Traction Surface

DD1 is our most popular DuraDeck product. It consists of a rugged traction design on both sides, suitable for heavy equipment usage in difficult conditions. The unique traction pattern prevents “spin out” in wet or slippery conditions.

Use DD1 on construction sites, drilling sites, landscaping projects, dredging sites, and anywhere a heavy-duty mat is required for access, ground protection, and equipment storage.

Standard DD1 mats are 4ft x 8ft long. Sections are ½” thick at the core – not including tread pattern height. DD1 contains 4 connection holes, one at each corner, and 4 additional connection holes (2 each at the center of the 8ft side). These allow panels to be connected in either direction and to be rotated at 90-degree angles as required. DD1 mats are also available in 2ft x 8ft, 3x6, and 3x8 sizes.

Use our DuraLink or PlastiLink™ connectors with DD1 panels to create contiguous and connected runs of material for roadways or work pads. DD1 can be stored on your own pallets, or on our specialized metal pallets.

DD2

Rugged Traction Surface & Pedestrian-Friendly Surface

DD2 is suitable for applications where pedestrians can be found, yet where a rugged tread design is or may at one point be desired. Each DD2 consists of a pedestrian-friendly, non-slip tread design on one side and our standard rugged-traction design on the other. Sections are reversible and can be used with either side face up. When facing up, the pedestrian-friendly surface still offers traction for vehicles and equipment, while the rugged down-facing side provides additional mat traction to the ground, preventing mat slippage or “spin out.

Use DD2 for parking areas, construction site walkways, concerts, and other uses where people are expected to walk on the DuraDeck regularly.

The DD2 pedestrian-friendly surface is also perfect for protection of concrete, asphalt, stone or aggregate surfaces where the rugged pattern may be too aggressive and could potentially cause damage. The pedestrian-friendly design may be placed face down on such surfaces to provide protection.

Standard DD2 mats are 4ft x 8ft long. Sections are ½” thick at the core, not including tread pattern height. DD2 contains 4 connection holes, one at each corner, and 4 additional connection holes (2 each at the center of the 8ft side). These allow panels to be connected in either direction and to be rotated at 90-degree angles as required. DD2 mats are also available in 2ft x 8ft, 3x6, and 3x8 sizes.

Use our DuraLink or PlastiLink connectors with DD2 panels to create contiguous and connected runs of material for roadways or work pads. DD2 can be stored on your own pallets or on our specialized metal pallets.

Duradeck Accessories

Connector Links

Bryant Utility Sales offers 4 different connection systems to meet your specific needs. We offer 2- and 4-way metal links and 2- and 4-way plastic links, depending on your needs.

Duralink Metal Links

Our DuraDeck metal links are formed using 3/4" x 1/4" flat steel and are available in 2- and 4-way versions to connect either 2 mats together end to end or 4 mats together at an intersection. Large continuous roadways can be created easily for work pad extensions or turning areas can be added of any size. Use DuraLink for heavyduty loads and for long-term projects on uneven or softer ground surfaces.

PlastiLink Plastic Links

Our Plastilink plastic links are injection molded in nylon for added strength and allow sections to be connected quickly for lower weight requirement applications. They are available in 2- and 4-way versions to connect 2 mats or 4 mats to each other as required. Plastilink's will not rust or corrode and can be used continuously in wet areas. Use Plastilink for lighter loads on more firm sub-surfaces.

DuraHook Drag Hooks

To speed the installation of DuraDeck, we recommend our DuraHook™ drag hook. This accessory can be inserted into pre-molded connector holes on each panel, allowing sections to be easily dragged into position.

Hole Plugs™

Bryant offers molded plastic Hole Plugs to fill unused connector holes for special events and other pedestrian access applications. Hole Plugs eliminate potential tripping hazards - especially when mats are down for upscale events - Hole Plugs will prevent women's high heels from getting caught in the holes.

Metal DuraPallets™

Signature offers extra large metal pallets for the easy transport of DuraDeck mats. Simply band sections to the DuraPallet for easy forklift handling, loading and unloading, and storage. Each DuraPallet is constructed from 1.25" square-tube metal and can hold up to 50 Dura Deck sheets.